magnetic strip measuring system
BANDA MAGNETICA - MAGNETIC STRIP

A fast and accurate system which allows reading of measurements directly on the M10 display. It is extremely easy to apply – just fix the magnetic strip on a suitable surface of the machine with double-sided adhesive tape and fit the display with the sensor on the movable part. When movement is made, the display indicates the position with respect to a machine reference. The measuring system can be used on PANEL SIZING MACHINES, ROLLER BEDS FOR MITRE SAWS, BORING MACHINES, CIRCULAR SAWS etc.

The magnetic strip measuring system  is supplied in kits, they are composed of:
- M10 display with 0.5 m cable
- Sensor
- Magnetic strip (with double-sided tape)
- 2 AA type batteries

MAIN CHARACTERISTICS:
• M10 display dimensions: 96x72x27 mm
• battery-powered with 1.5V AA type battery with a 12-month life
• system accuracy: 0.1 mm
• 5 incremental counting
• 5 programmable offsets
• programmable zero point
• battery check
• self diagnostic in real-time
• wide installation tolerances
• parameters stored in permanent memory
• battery voltage control shown on the display
• multifunction LCD display
• 4-key display keypad
• operating temperature: 5° - 60ºC
• storage temperature: -20° - 70ºC
• max. humidity: 95% (condensation not permitted)
• magnetic strip: 10x2 mm
• type of magnetic strip: MT500
• distance between magnetic strip and sensor: max. 2.5 mm

Download here the "Magnetic Strip Brochure"